9.2 Schedule New Classes

Purpose: Use this document as a reference for scheduling new classes in ctcLink.

Audience: Staff responsible for maintaining class schedules.

If the course has already been scheduled for this term, refer to the “Schedule Additional Class Sections” QRG.

Navigation: NavBar > Navigator > Curriculum Management > Schedule of Classes > Schedule New Course

  1. Enter as much search information as possible to narrow the search. Suggested fields are below. Select the lookup icon (magnifying glass) for a list of values.
    1. Academic Institution
    2. Term
    3. Subject Area
    4. Catalog Nbr
  2. Select the Search button.
Schedule New Coure Find an Exisiting Value
  1. Select the appropriate class from the search results.
  2. Basic Data tab required fields:
    1. Session: select from the lookup list values.
    2. Class Section: determined by local institutional process.
    3. Start/End Date: automatically populates based on the selected session but can be modified.
    4. Component: defaults to the primary component set up in the Course Catalog but can be modified.
    5. Class Type: most courses will be set to allow student enrollment; set to Non-Enroll for Auto-Enroll Component classes.
    6. Associated Class: used to link class sections that constitute a single course offering. For instance, lecture, lab, and discussion sections are combined into one class number to indicate that the three components are related to one another.
    7. Location: defaults to main, important to update when class is not on main campus and required for Dept. of Corrections classes for reporting to SBCTC.
    8. Academic Organization: auto-populates from the Course Catalog.
    9. Holiday Schedule: auto-populates from the session selection.
    10. Instruction Mode: defaults to P for In Person. Update this field based on the course offering.
    11. Legacy Item Number Attribute: Used during class conversion
    12. Class Attributes: auto-populates from the Course Catalog.
    13. Non-Required fields are used based on local college process.

Select the Schedule Print checkbox below the Add Fee button in order for students to search for the class and enroll. The checkbox does not need to be selected in order to successfully select save; it must be selected to allow search/ enrollment.

Note for CampusCE

Information and Fields that carry over to CampusCE: 

  • CourseID
  • Term
  • Subject Area 
  • Class Nbr
  • Catalog Nbr
  • Class Section
  • Start/End Date

Only the graded component goes to CampusCE. 

Classes will move to CampusCE regardless of schedule print checkbox on or off.

Basic Data tab

Associated Class number has impacts on Enrollment Requirement Groups, Enrollment Actions and Wait List processing.  With the exception of multiple component classes that are linked by Associated class number, it is recommended that colleges give class sections unique Class Association numbers

Note: The Auto Create Component button is used to add additional sections for multiple component classes. (i.e. a course with lecture and lab components). Components are set up on the Course Catalog page. See the QRG Defining Class Associations for additional information.

  1. Select the Meetings tab.

Note of CampusCE

All the meeting pattern info moves to CampusCE, along with Building name, Facility ID and Description.

  1. In the Meeting Pattern section enter the following:
    1. Facility ID: click the lookup icon to select a classroom or enter the information if known.
    2. Capacity Pat: select from the available meeting patterns, if a matching meeting pattern is not available select the meeting days of the week under the M T W T F S S headings.
    3. Mtg Start: enter the class start time (e.g. 8:00 AM).
    4. Mtg End: enter the class end time (e.g. 8:50 AM).
    5. Start/End Date: courses can have multiple meeting patterns in a selected term, input the start and end dates for this specific meeting pattern. Select the (+) to enter additional meeting patterns. For example, meeting patterns may need to be adjusted for holidays.

Note for CampusCE

If the class has a topic, use a topic ID# (must be set up on the course) or add a free form topic. These will be sent to CampusCE.

  1. In the Instructors for Meeting Pattern section, enter the following:
    1. Instructor ID: enter the instructor ID or select it using the lookup icon. If there is more than one instructor select the (+) and enter one ID per row.
    2. For each instructor, select the following:
      1. Assignment Tab
        1. Instructor Role (Primary, TA, etc).
          1. Access Levels
            • Approve: enter grades and approve the grade roster.
            • Grade: only enter grades for the class.
            • Post: enter grades, approve the roster, and post the grades.
        2. Workload Tab
          1. Assign Type
          2. Load Factor

Note for CampusCE

Instructor name and EMPLID are sent to CampusCE. Instructor name can be edited in CampusCE by updating the display name.

Note: These fields are used for Faculty Workload, see additional details on the Faculty Workload QRGs.

Meetings tab
  1. Select the Enrollment Cntrl tab to set enrollment limits and capacity requirements, and to identify sections for which you want the system to auto enroll students.
    1. Class Status: defaults to “Active” but can be modified if sessions are added or cancelled.
    2. Add Consent and Drop Consent fields default from the Catalog Data page and indicate the type of consent, if any that is required to enroll in or drop the class.
    3. Enter the appropriate values for Room Capacity, Enrollment Capacity, Wait List Capacity and Minimum Enrollment Nbr:

Note for CampusCE

  • Only Active classes, from the CNED career move to CampusCE.
  • Only the enrolled section will move to CampusCE, non enrollment sections do not move.
  • Consent is not used.

Note: Component classes that are auto enrolled need to equal the capacity for the primary course

  1. Enter the component/associated courses in the 1st Auto Enroll 2nd Auto Enroll sections. These are the courses into which the student will be auto enrolled. (i.e. lecture course is the primary course the student enrolls in and they are auto-enrolled into a lab component section).
Enrollment Cntrl tab
  1. Select the Reserve Cap tab to assign reserve capacities for class sections.

Note for CampusCE

  • Enrollment Capacity and Minimum Enrollment Nbr can be populated and sent to CampusCE.
  • Capacity can be changed in CampusCE but this will not change the capacity in ctcLink PeopleSoft, and could cause enrollment issues. Be sure to change in both systems.
Reserve Cap tab
  1. Select the Notes tab to attach existing class notes or free-form text notes to class sections. Class notes are printed in the Schedule of Classes to provide students with information on the class.
Notes tab

Notes for CampusCE

Use a Note Nbr or Free Format Text to provide additional information to students in CampusCE.

  1. Select the Exam tab to manually schedule exam times for the class sections. Enter the appropriate values into Exam Date, Exam Start (time) and Exam End (time).
Exam tab
  1. Select the Save button.
  2. To schedule another section of the same course, select the Basic Data tab.
  3. Select the Plus (+) button on the Basic Data tab to add a new row.
  4. Repeat steps above.
Class Sections section
  1. Select the Save button after adding each course section.
  2. Textbooks can be added when new class sections are scheduled or at a later time.  For instructions on adding textbooks use the Adding Textbook Information to a Class QRG.


Tanjagay Martin

Hello Kristene, We recommend that you contact Enrollment or Advisement Services at the institution that you are interested in attending. The college of your choice will be able to assist you with selecting and successfully enrolling in summer classes. Thank you so much for your question. Have a great day!

Add your comment

E-Mail me when someone replies to this comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.